SIDE PANELS

Back to Lazi Dawg
Click on any photo to see a larger version
Sides planked with plywood.\nHolding sheets up to glue and screw them off\nwas difficult to do single-handed. I finally managed\nby screwing plywood tabs to the underside of the\nbottom panels and clamps to keep the panel from silding off A further view of the side panels.\nThey were attached with glue and screws. Side panel at prow. Attached with glue\nand screws to cant strips as per plans. View of right side panel and transom. View of stern showing the simple jacks used\nto hold the transom level while I forced the twist\nout of the sternpost. It seems to have worked and\neverything is staying in the right place now. Rail being glued and screwed in place.\nTop edge of side panel is sandwiched between\nwhite oak inner board and doug fir outer. I used\nhardwood because screws hold better in it.